lap joint

lap joint

美  英

  • na.lapped joint 搭接(处)
  • 网络搭接接头;接搭处;单搭接接头

英汉解释

na.
1.
lapped joint 搭接(处)

英英解释

n.

例句

However, further increasing of RE content would degrade the shear properties of the lap joint.

而当稀土含量进一步增加时,焊点的强度及塑性均下降。

The shear strength and elongation of the lap joint increase with the increase of strain rate.

焊点的剪切强度及伸长量随应变速率的增加而增加。

The Results show that the addition of minute RE (. 25wt%) can improve the shear strength and elongation of the lap joint.

结果表明,微量稀土(质量分数.25%)不但能提高焊点的剪切强度,而且可以改善焊点的塑性。

It suggested lap joint should be avoided in load carrying structures.

指出了在承力结构中应该尽量避免搭接焊。

Standard specification for lap joint flange pipe end applications.

搭接凸缘管端应用规范。

The single lap joint fails when the crack length reaches to the critical size.

当裂纹扩展到临界尺寸时,接头会迅速破坏。

Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

用单面搭接迭层板装配件的抗拉荷载法测定胶粘剂抗剪切强度的试验方法

Influence of Elastic Modulus of Adhesive on the Stress and Strain Distribution in Aluminium Single Lap Joint

胶粘剂弹性模量对铝合金单搭接接头应力应变分布的影响

Research on Stress Distribution in Single Lap Joint of Gap Glue-Line with Asymmetrical Rigidity

刚度不对称的间隙胶层单搭接接头中应力分布的研究

Finite Element Analysis of Stress Intensity Factors of Lap Joint with Multiple Site Damage

含多处损伤搭接结构应力强度因子有限元分析

The orthogonal test of numerical modeling on the peck stress distributed in single lap joint

单搭接接头峰值应力数值模拟的正交法分析

Effect of Environmental Temperature on Strain in Adhesive Layer of Single Lap Joint

单搭接接头胶层中的温度应变研究

specification for lap joint flange pipe end applications

搭接法兰管端规范

Finite element analysis on reliability design of adhesively bonded single lap joint

基于有限元方法的单搭接接头可靠性设计

Effect of magnetic field on shear strength of adhesively bonded single lap joint

外加磁场对粘接接头剪切强度的影响

Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

胶粘连接单边搭接样品试验结果的使用的标准指南

joggled lap joint; flush lap joint

搭接对接接头